We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Search results for: 'Hager - Design 10 16 way Consumer Unit 100A Switch 2x100A 30mA RCDs c/w 12 MCBs'
-
Consumer unit main switch 7way T2 SPD- 7 usable ways
- Factory fitted direct to busbar T2 SPD
- Factory fitted 100a main switch
- Fixed tail clamp on the din rail
-
Consumer unit main switch 11way T2 SPD- 11 usable ways
- Factory fitted direct to busbar T2 SPD
- Factory fitted 100a main switch
- Fixed tail clamp on the din rail
-
Consumer unit main switch 15way T2 SPD- 15 usable ways
- Factory fitted direct to busbar T2 SPD
- Factory fitted 100a main switch
- Fixed tail clamp on the din rail
-
Consumer unit main switch 21way T2 SPD- 21 usable ways
- Factory fitted direct to busbar T2 SPD
- Factory fitted 100a main switch
- Fixed tail clamp on the din rail
-
RCD - 4 pole 100A 30mA, 10kA- Class A 4 Pole RCCB
- 400V, 50Hz rated operational voltage
- 300ms (standard tripping time 1 X)
- 40ms (standard tripping Time 5 X)
-
100A Mains Switch 2 Way Metal Board- One extra module for SPD
- Extra height for single module RCBOs
- Knockouts to top,bottom,rear,sides
- With circuit identification labels
-
100A Mains Switch 8 Way Metal Board- One extra module for SPD
- Extra height for single module RCBOs
- Knockouts to top,bottom,rear,sides
- With circuit identification labels
-
RCD 100A 30mA 4P type A- Type A
- 4 Pole
- 10kA
- ARCDLKTPN fitting kit required
-
13 Amp Fused Connection Units - Switched c/w flex outlet- Switched 13A fused spur w/ F/O
- Round corner edges
- Suitable for 25mm back box
- White plastic
-
Switched Interlocked RCD Protected Sockets - 16A 110V 2P+E, c/w 25A- IP65 ingress protection
- RCD protection
- Require no additional wiring
- Cable entry from top or bottom